Description
The GYS AUTOPULSE 220-M3 032897 is a pulsed MIG/MAG welding machine with three integrated wire feeders designed for professional car-body repair applications. Its synergic welding technology supports Steel, Aluminum and Brazing (CuSi3/CuAl8) applications, including thin sheet materials.
Optimized MIG/MAG Settings
- Welding Processes: Standard, Pulse, Pulse in Pulse, Cold Pulse and Manual
- Trigger Modes: 2T, 4T, SPOT, DELAY and TACK
- Welding Cycle Control: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill and Post gas
- Wire Diameters: 0.6 to 1.2 mm
- Wire Reel Capacity: Up to three Ø 200 mm wire reels
Simplified Welding
68 adjustable synergic curves cover a wide range of materials, wire sizes and shielding gases. Fully synergic operation automatically calculates the optimum welding parameters, with adjustment available for wire speed, voltage and current.
Maximum Productivity
- Four microprocessors for increased processing power
- Three-wheel drive system with two active drive rolls
- Automatic torch detection when pulling the trigger
- Push-pull torch compatibility (24 V)
Ergonomic Interface
- Centralized interface designed for car-body repair operations
- Large color screen for welding-cycle setup
- Two control knobs and four keys for menu navigation
- Machine and synergies can be updated by USB key
- Stores up to 500 welding programs for repetitive tasks
Specifications
Part Number: 032897
Power Supply: 208–240 V, single-phase
Current Range: 15–220 A
Wire Diameter: 0.6–1.2 mm
Wire Feed Speed: 1–20 m/min
Wire Reel Diameter: Ø 200 mm
Duty Cycle at 40°C: 150 A @ 60%; 130 A @ 100%
No-Load Voltage: 80 V
Dimensions: 90 × 63 × 92.5 cm
Weight: 69 KG
Protection Rating: IP21
Generator Compatibility: 10 kVA
