Description
AUTOPULSE 320-T3 – Product Overview
The AUTOPULSE 320-T3 – 036710 is a digital MIG/MAG double pulse welding generator with three integrated wire feeders. Featuring 57 synergic curves, it provides welding capabilities for steel, aluminum and brazing with CuSi3/CuAl8. Its user-friendly interface and precise wire feed support welding on very thin sheets.
MIG/MAG Optimized Settings
- Welding Processes: Standard, Pulse, Pulse in Pulse and Manual.
- Trigger Activation Modes: 2T, 4T, SPOT, DELAY and TACK.
- Welding Cycle Control: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler and Postgaz.
- Steel Wire: 0.8 / 1.0 mm.
- Stainless Steel Wire: 0.8 / 1.0 mm.
- Aluminum Wire: 0.8 / 1.0 / 1.2 mm.
- Brazing Wire: CuSi and CuAl, 0.8 / 1.0 mm.
Simplified Welding
- 57 synergic curves for a wide range of materials, wire sizes and gases.
- Integral synergic mode automatically determines welding settings.
- Wire feed speed, voltage, current and self settings can be adjusted by the user.
Maximum Productivity
- Four microprocessors increase calculation speed and machine efficiency.
- Very high arc voltage for easy arcing and arc performance on different metals.
- Three electronically regulated wire feeders with four drive rolls each.
- Accommodates up to three 200 mm wire reels.
- Automatic torch detection when the trigger is pressed.
- Overhanging torch support for three torches and a welding helmet.
- Compatible with 24 V Push Pull torches.
- Compatible with Spool Guns for aluminum soft wire (AlSi5 / AlSi12).
User-Friendly Interface
- Simplified interface designed for body shop staff.
- Colour XL screen for precise welding cycle control.
- Two scroll wheels and four buttons for navigating menus.
- Machine and program updates through a USB stick.
- Storage for up to 500 welding programs.
- Three interface levels: EASY, EXPERT and AVANCÉ.
Robust and Mobile Design
- Reinforced casing.
- IP23 protection rating.
- Low base suitable for two gas bottles (2 x 4 m3).
Technical Specifications
Part Number: 036710
Power Supply: 400 V three-phase
Welding Current: 15–320 A
Fuse: 16 A
Wire Diameter: 0.8–1.2 mm
Wire Reel Diameter: 200 mm
Wire Feed Speed: 0.5–20 m/min
Duty Cycle: 260 A at 60% / 240 A at 100% (40°C)
No-Load Voltage: 85 V
Dimensions: 90 x 63 x 92.5 cm
Weight: 82.5 kg
Protection Rating: IP23
Generator Power: 24 kVA
Welding Standard: EN 60974-1
